Even expen­sive smart­phones do not have bat­ter­ies that last for­ev­er. When the capac­i­ty drops to a min­i­mum, the search for the charg­er or the lost end of the USB cable begins. Own­ers of smart­phones on Android and espe­cial­ly the iPhone are often tired of life at the out­let. Wire­less charg­ing keeps the bat­tery alive, pro­tects the port of the device and nerves. We found out which mod­els of wire­less mem­o­ry for Android and iPhone deserve the title of the best.

Wire­less charg­ing is a min­i­mum of unnec­es­sary actions. Set and for­get. Pho­to: howtogeek.com

Advan­tages of wire­less charg­ers
Belkin Boost Up
Apple MagSafe
Log­itech Pow­ered 3‑in‑1 dock
Nana­mi Fast Wire­less Charg­er
Choetech Dual Wire­less Charg­er
Anker Pow­er­Wave Charg­er
Xiao­mi Mi 20W Wire­less Charg­ing Stand

Advantages of wireless chargers

With a wire and a pow­er sup­ply, it’s more famil­iar, con­ser­v­a­tives say. The tra­di­tion­al way is clear, but not always suit­able. Cables dan­gling on the floor get tan­gled under­foot. This is a dan­ger­ous object for chil­dren and ani­mals. It is not con­ve­nient in every sit­u­a­tion to con­nect a smart­phone to a pow­er out­let. At work, cables and pow­er sup­plies are easy to mix up or lose. Car­ry­ing a fold­ed mem­o­ry in your bag is unnec­es­sary trou­ble.

5 advan­tages of wire­less charg­ers:

  • max­i­mum sim­plic­i­ty;
  • the safe­ty of the USB port of the device, fac­to­ry mem­o­ry and wires. No need to buy a new block, wire or fix a loose sock­et;
  • you can charge sev­er­al devices — not just a smart­phone;
  • safe work. Pow­er surges in the net­work will not dam­age the elec­tron­ics of the phone;
  • work any­where: on the desk­top, at home near the com­put­er. Wire­less charg­ers are con­nect­ed to a 220V or 5V net­work (to a PC USB port).

Belkin Boost Up

Boost Up is a reli­able and aes­thet­ic charg­er. Pho­to: empow-her.com

Charg­er for iPhone at 7.5W, Sam­sung up to 9W, oth­er Qi-enabled smart­phones up to 10W.

For com­par­i­son: Sam­sung S22 Ultra is charged from a 45-watt pow­er sup­ply via a wire for 62 min­utes. With Belkin Boost Up, about 4.5 hours. Exact charg­ing time may vary depend­ing on phone mod­el, sup­port­ed tech­nolo­gies, etc.

Belkin Boost Up Works with phones in cas­es up to 3 mm thick. The LED indi­ca­tor indi­cates the charge of the device. Boost Up has a smart object detec­tion fea­ture built in. The sen­sor rec­og­nizes the phone. If you put some­thing met­al instead of it, charg­ing will not start.

The device is made in the form of a stand. Smart­phones of stan­dard sizes are sta­ble. Boost Up is con­nect­ed to the out­let with a com­plete pow­er sup­ply. Thanks to the for­mat of the stand, charg­ing does not col­lect dust and does not take up much space.

Belkin Boost Up Spec­i­fi­ca­tions:

  • pow­er: 10 W;
  • size: 10.16 x 7.62 x 7.62 cm;
  • weight: 85 g.

Ben­e­fi­cial fea­tures:

  • suf­fi­cient pow­er for unhur­ried charg­ing;
  • sup­port for land­scape and por­trait ori­en­ta­tions of the phone on the stand;
  • 3 year war­ran­ty from the man­u­fac­tur­er.

What is impor­tant to know:

  • the price is high­er than that of less­er known ana­logues.

Apple MagSafe

Small, mobile, com­pat­i­ble with any stand or hold­er mod­el. Pho­to: iPhones.ru

Accord­ing to for­eign and Russ­ian sur­veys, the best wire­less charg­er for iPhone 12 and iPhone 13. A device with mag­nets joins these ver­sions of Apple smart­phones instant­ly. The 15W pow­er makes charg­ing faster than is pos­si­ble with the base Qi mod­el.

iPhone 12 Pro charges up to 100% via MagSafe in 188–190 min­utes. Via cable — in 104 min­utes. For max­i­mum effi­cien­cy of the wire­less charg­er, you need to use a larg­er pow­er sup­ply. For 15-watt MagSafe, the man­u­fac­tur­er rec­om­mends 20-watt adapters (not nec­es­sar­i­ly from Apple).

MagSafe also charges Apple head­phones. Mod­els of Air­Pods and Air­Pods Pro with­out mag­nets, but they are easy to com­bine with a large “disk” of the charg­er.

Fea­tures of Apple MagSafe:

  • pow­er: 15W;
  • size: 8.2 x 8.2 x 1.87 cm;
  • weight: 87 g.

Ben­e­fi­cial fea­tures:

  • con­ve­nient portable design;
  • increased pow­er (15 W) for faster charg­ing;
  • cor­po­rate design in the spir­it of Apple acces­sories;
  • con­nec­tion with­out addi­tion­al plates that inter­fere with Apple Pay.

What is impor­tant to know:

  • When charg­ing an iPhone 12 mini or iPhone 13 mini, pow­er is lim­it­ed to 12W;
  • 20W adapter sold sep­a­rate­ly;
  • MagSafe should not be used with soft leather cas­es. The device exces­sive­ly heats the mate­r­i­al, deforms it over time.

Logitech Powered 3‑in‑1 dock

The hybrid for­mat elim­i­nates a bunch of wires. Pho­to: hardwarezone.com.sg

The dock­ing sta­tion from Log­itech charges Android or iPhone smart­phones, Air­Pods (reg­u­lar or Pro) and Apple Watch at the same time. Engi­neers have thought of a con­ve­nient place for each device. On a charg­ing phone, it’s com­fort­able to use Face­Time, take notes, etc.

The design of the mod­el will not get lost in office or home inte­ri­ors. The 3‑in‑1 dock is larg­er than typ­i­cal charg­ers, but still does­n’t take up much space.

Apple smart­phones are charged at 7.5 watts of pow­er, Android devices at 10 watts. The built-in indi­ca­tor light lights up when charg­ing is in progress. The iPhone can be charged direct­ly in the case if its thick­ness is no more than 3 mm.

Fea­tures Log­itech Pow­ered 3‑in‑1 dock:

  • pow­er: 7.5 or 10 W;
  • size: 23.5 x 11.7 x 10.1 cm;
  • weight: 590 g.

Ben­e­fi­cial fea­tures:

  • charge three devices at the same time;
  • charges iPhone at 7.5 W;
  • styl­ish design.

What is impor­tant to know:

  • the size and weight are not small — you can’t name a minia­ture and light mod­el;
  • the cost of the dock­ing sta­tion is more than 7000 rubles.

Nanami Fast Wireless Charger

Nana­mi — wire­less charg­ing at the price of a sim­ple pow­er sup­ply. Pho­to: tomsguide.com

The Nana­mi Fast Wire­less Charg­er con­cept is sim­plic­i­ty. The mod­el does not impress with inno­va­tion or style. But it charges any suit­able Android or iOS smart­phones sta­bly and safe­ly. Devices can be placed hor­i­zon­tal­ly or ver­ti­cal­ly on the plat­form.

With the declared pow­er of 10 W (for Android), Nana­mi is not infe­ri­or to com­peti­tors in terms of speed. iPhone charg­ing pow­er is clas­sic — 7.5 watts. To achieve max­i­mum charge speed, you need to buy a QuickCharge 2.0 adapter.

Engi­neers thought out a smart­phone pro­tec­tion sys­tem. The device is guar­an­teed not to over­heat or over­charge. Charg­er diode sen­sor — with a use­ful shut­down func­tion. 10 sec­onds after the start of the process, the light goes out so as not to dis­turb the sleep pat­tern of a per­son.

Spec­i­fi­ca­tions of Nana­mi Fast Wire­less Charg­er:

  • pow­er: 10 W;
  • size: 13.4 x 9.9 x 7.1 cm;
  • weight: 198 g.

Ben­e­fi­cial fea­tures:

  • low price (about 1000–1200 rubles);
  • does not inter­fere with sleep;
  • built-in secu­ri­ty tech­nolo­gies.

What is impor­tant to know:

  • slight­ly old-fash­ioned design;
  • large devices are not so sta­ble;
  • you may need to pur­chase an addi­tion­al adapter to speed up charg­ing.

Choetech Dual Wireless Charger

Choetech with well-thought-out heat dis­si­pa­tion and 5 coils has almost no draw­backs. Pho­to: tomsguide.com

Chotech Dual Wire­less Charg­er charges up to two devices simul­ta­ne­ous­ly. Valid com­bi­na­tions: two smart­phones, smart­phone + Air­Pods or Air­Pods Pro. On a wide plat­form, the devices do not inter­fere with each oth­er and do not slip. The sta­ble posi­tion of the devices is guar­an­teed by the leather cov­er­ing.

Wire­less charg­ing out­put up to 10W. The mod­el from the fac­to­ry is equipped with a QuickCharge 3.0 18 W pow­er sup­ply — you do not need to buy any­thing else. Holes are locat­ed at the bot­tom for heat dis­si­pa­tion.

Fea­tures of Chotech Dual Wire­less Charg­er:

  • pow­er — up to 10 W;
  • size: 12.1 x 9.9 x 9.1 cm;
  • weight: 170 g.

Ben­e­fi­cial fea­tures:

  • charges any eli­gi­ble smart­phones and Apple acces­sories in one place;
  • rea­son­able price (from 2000 rubles);
  • There is a lot of space on the charg­ing pad.

What is impor­tant to know:

  • the design is very sim­ple;
  • the size is larg­er than that of ana­logues.

Anker PowerWave Charger

Anker Pow­er­Wave keeps your phone cool while charg­ing. Pho­to: malonepost.com

Pow­er­Wave deliv­ers up to 10W of pow­er for Android phones and up to 7.5W for iPhones. The sup­ply of cur­rent is clear­ly con­trolled by a smart board, which does not allow exceed­ing the per­mis­si­ble val­ues. Safe charg­ing is com­ple­ment­ed by a built-in fan. The cool­er cools the pan­el and the smart­phone itself to avoid over­heat­ing.

The Anker Pow­er­Wave anti-slip sur­face pre­vents your phone from being acci­den­tal­ly dropped. The LED indi­ca­tor noti­fies you when charg­ing is in progress or when an incom­pat­i­ble pow­er adapter is con­nect­ed.

Anker Pow­er­Wave Charg­er Spec­i­fi­ca­tions:

  • pow­er: 10 W;
  • size: 10.9 x 10.9 x 1.7 cm;
  • weight: 141 g.

Ben­e­fi­cial fea­tures:

  • built-in fan pre­vents over­heat­ing of the smart­phone;
  • com­pact form fac­tor;
  • war­ran­ty — 18 months;
  • sta­bil­i­ty of the phone in a hor­i­zon­tal or ver­ti­cal posi­tion.

What is impor­tant to know:

  • the design is sim­ple.

Xiaomi Mi 20W Wireless Charging Stand

Xiao­mi Mi 20W Wire­less Charg­ing Stand is pro­tect­ed from over­heat­ing, dust and insta­bil­i­ty. Pho­to: xiaomiui.net

The Chi­nese giant offers a ver­sa­tile mod­el with a small dock­ing sta­tion form fac­tor. Xiao­mi Mi 20W Wire­less Charg­ing Stand made of mat­te plas­tic is resis­tant to fin­ger­prints and dirt accu­mu­la­tion on the sur­face. Thanks to the rub­ber­ized “leg” the device does not slip even on a tile. Con­nects to a pow­er out­let via a USB Type‑C port. The oper­a­tion of the device is sig­naled by an LED indi­ca­tor.

The charg­er is reli­ably pro­tect­ed from typ­i­cal prob­lems: over­heat­ing, over­volt­age, short cir­cuit. Acci­den­tal acti­va­tion will not hap­pen: the mod­el is able to dis­tin­guish the phone from met­al objects.

You can charge any phone with Qi tech­nol­o­gy on Xiao­mi Mi 20W Wire­less Charg­ing Stand. The out­put pow­er depends on the pow­er sup­ply. With an adapter from 18 to 27 W, the charg­er will give out 10 W, from 10 to 18 W — 5 W.

Spec­i­fi­ca­tions of Xiao­mi Mi 20W Wire­less Charg­ing Stand:

  • pow­er: up to 20 W;
  • size: 10.9 x 9.1 x 9.1 cm;
  • weight: 219 g.

Ben­e­fi­cial fea­tures:

  • charg­ing any suit­able smart­phone;
  • sta­bil­i­ty and reli­a­bil­i­ty;
  • high pow­er;
  • 2 coils for charg­ing a smart­phone in hor­i­zon­tal and ver­ti­cal posi­tions.

What is impor­tant to know:

  • Pow­er sup­plies less than 10W are not sup­port­ed.


The only neg­a­tive of wire­less charg­ing is the pow­er and cur­rent strength. The effi­cien­cy of wire­less mod­els is 65–75%, the stan­dard pow­er sup­ply with cable is about 95%. Even with a QuickCharge 2.0 or 3.0 adapter, you won’t be able to charge your smart­phone as quick­ly as over a wire.

Wire­less mod­els are infe­ri­or in speed to wired tech­nol­o­gy, but this is not the main thing. Their task is to main­tain the bat­tery capac­i­ty at an accept­able lev­el, to charge var­i­ous devices. Con­ve­nience, min­i­mal­ism, refusal to con­stant­ly search for a cable — this is what makes portable charg­ers pop­u­lar and nec­es­sary. Albeit as an acces­so­ry.